Advice

What is Venetian plaster?

A plain guide to Venetian plaster: what it is made of, how it is applied, how it compares with marmorino, tadelakt and microcement, and how to look after it.

Updated November 2026

Venetian plaster is a decorative wall finish made from lime and marble dust, applied in thin layers and polished with a steel trowel until it has the look and feel of polished stone. It is sometimes called polished plaster, stucco veneziano or marmorino, and it has been used for centuries in Italian buildings before becoming popular in British homes over the last few decades.

What Venetian plaster is made of

Traditional Venetian plaster is a mineral finish. Stucco Italiano describes its Marmorino Fine as made from aged, slaked lime and selected marble powders, and most traditional products follow a similar recipe. The lime is what makes it breathable, and the marble gives it hardness and its characteristic sparkle.

You will also find acrylic products sold as Venetian plaster. They can look similar when new, but Vasari, a lime plaster maker, points out that acrylic versions lack breathability and age differently. If you live in an older solid-wall house, a lime-based product is usually the better choice, for the same reasons explained in our lime plaster guide.

Where it comes from

As the name suggests, the finish is linked with Venice. According to Vasari, stucco veneziano and marmorino were hallmarks of Italian architecture from the 15th to the 17th centuries, and the technique has been revived many times since.

How Venetian plaster is applied

Venetian plaster is all about thin layers and patient hand work. A typical job runs like this:

  1. Preparing the wall. The surface must be sound, flat and clean. Polished plasters work best on porous surfaces with some suction, according to Mike Wye, and manufacturers recommend a primer on gypsum plaster and plasterboard.
  2. Applying the coats. The plaster is spread very thinly with a steel trowel or spatula. Stucco Italiano recommends at least three coats of its Marmorino Fine, while other products need two or three.
  3. Burnishing. The final coat is pressed hard with the trowel, again and again, to close the surface and bring up the sheen. Mike Wye suggests starting this 30 to 60 minutes after application.
  4. Curing and waxing. The plaster is left to cure and harden, and then a natural wax can be applied. Mike Wye suggests allowing a day after burnishing before waxing.

Stucco Italiano gives a drying time of about three hours to the touch and 48 hours below the surface at 20°C, which is why even a single feature wall is usually spread over more than one day.

Venetian plaster, marmorino, tadelakt and microcement

These finishes are often mentioned together, but they are quite different.

FinishWhat it isBest for
Venetian plasterLime and marble plaster, applied thinly and polished to a high sheenFeature walls, living rooms, hallways
MarmorinoA lime and marble plaster with a softer, more matt stone lookWalls where a calm, natural finish is wanted
TadelaktA traditional lime plaster from the Marrakesh region of Morocco, polished and treated with olive oil soap to make it waterproofShowers, wet rooms and baths
MicrocementA mix of cement, polymers and fine aggregates laid about 2 to 3mm thickFloors, worktops and walls with a concrete look

Homebuilding and Renovating explains that the soap used on tadelakt reacts with the lime to form calcium stearate, which is what makes it water-resistant, and describes it as suited to showers and wet rooms. Microcement, by contrast, is a cement and polymer product rather than a lime plaster, and needs sealing to stop it staining.

Is Venetian plaster suitable for bathrooms and kitchens?

It can be, with care. Stucco Italiano says a protective treatment is optional in most rooms but necessary on bathroom, kitchen and splashback walls, and that the coating should be protected from rain or water running continuously down the wall. In practice that means Venetian plaster works well on bathroom walls away from the shower and on sealed kitchen splashbacks, while tadelakt is the better option inside a shower.

Looking after Venetian plaster

  • Dust or wipe it with a soft, slightly damp cloth, and avoid harsh or abrasive cleaners.
  • Re-wax areas that see a lot of wear, such as splashbacks, from time to time.
  • Small scuffs can often be polished or patched rather than redoing the whole wall.
Thinking about Venetian plaster for your home? See what it costs in our Venetian plaster cost guide, or find out how we apply it in Brighton and Hove.

Frequently asked questions

What is Venetian plaster made of?

Traditional Venetian plaster is made from slaked lime and marble powder. Stucco Italiano describes its Marmorino as aged, slaked lime with selected marble powders. There are also acrylic products sold as Venetian plaster, which look similar but are not breathable.

Is Venetian plaster the same as polished plaster?

The terms are often used to mean the same thing. Polished plaster is the wider family of lime and marble finishes that are burnished to a sheen, and Venetian plaster is the best-known type.

Is Venetian plaster waterproof?

Not on its own. Manufacturers say it needs a protective treatment, usually wax, in bathrooms, kitchens and on splashbacks, and should not be exposed to running water. Tadelakt is the lime finish designed for showers and wet rooms.

How long does Venetian plaster last?

When it is applied and looked after properly, lime-based Venetian plaster can last for decades. Small marks can often be polished out or repaired without redoing the whole wall.

Can you paint over Venetian plaster?

You can, but it rather defeats the point, and paint will hide the depth and sheen that make the finish special. If you want a change of colour, it is usually better to apply a new coat of Venetian plaster.

Sources

Third-party figures are national or regional guides, not Brighton quotes. Every job is priced after a free visit.

  1. Stucco Italiano, Marmorino Fine technical data sheet, April 2023. https://www.stuccoitaliano.com/wp-content/uploads/2023/04/Marmorino_Fine_TDS_Stucco_Italiano_04042023.pdf
  2. Mike Wye, How to apply Venetian polished plaster. https://www.mikewye.co.uk/wp-content/uploads/wp-advanced-pdf/1/how-to-apply-venetian-plaster.pdf
  3. Vasari Lime Plaster and Paint, What is Venetian plaster?, 10 July 2026. https://vasariplaster.com/blogs/news/what-is-venetian-plaster-a-complete-guide-to-this-classic-lime-based-finish
  4. Homebuilding and Renovating, Tadelakt, 12 January 2022. https://homebuilding.co.uk/advice/tadelakt
  5. Homebuilding and Renovating, Microcement flooring, 7 September 2024. https://www.homebuilding.co.uk/advice/microcement-flooring

Get a free estimate with no call-out fee and no obligation.

Call 01273 115520

Contact us

Tell us a little about your project and we will call you back to talk it through and arrange a free estimate.

Based in Lancing, working across Brighton, Hove and nearby towns
BrightonHovePortsladeShorehamLancingWorthingRottingdean
Future offers (optional)
Privacy policy available at - https://plasterersbrightonandhove.com/privacy-policy-2/